Heat Shrink Tubing , 3:1 Irradiated Polyolefin Heat Shrink Tubing FT3A–3:1 Dual Wall Adhesive Lined Polyolefin Heat Shrink Tubing (SAE-AMS-DTL-23053/4)
Flame Retardant, Dual Wall Adhesive-Lined, Multi-Purpose Heat Shrinkable Tubing
Our FT3A is made of flame retardant, cross-linked polyolefin with an inner coating of hot-melt adhesive. Adhesive-lined heat shrink tubing with environmental sealing capability is used for a wide variety of electrical applications including, automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Request a Quote for FT3A–3:1 Dual Wall Adhesive Lined Polyolefin Heat Shrink Tubing (SAE-AMS-DTL-23053/4)
- Shrink Ratio: 3:1
- Operating Temperature: -45℃ to 125℃.
- Shrink temperature: 120℃
- Voltage Rating: 600V
- Flame retardant
- Meets MIL-DTL-23053/4, Class 3
- UL & CSA Certified
- RoHS Compliant
Standard Colors & Ordering Information
Color Code: 0=BLK, 1=BRN, 2=RED, 3=ORN, 4=YLW, 5=GRN, 6=BLU, 7=VIO, 8=GRY, 9=WHT, X=CLR
Delivery: All Stocked Items Available for Immediate Shipment, 8 Week Lead Time for Non-stocked Items
Flex Wires | As Supplied | After Recovery | Std. Pkg. |
||||||
W/ Size | mm | inch | mm | inch | mm | inch | mm | Inches | FT |
FT3A-1/8 | 3.2 | 0.1250 | 1.0 | 0.039 | 0.95±0.08 | 0.037±0.006 | 0.35±0.10 | 0.0138±0.004 | 500 or 4’ length |
FT3A-3/16 | 4.8 | 0.1875 | 1.6 | 0.063 | 1.10±0.08 | 0.043±0.006 | 0.40±0.10 | 0.0157±0.004 | 200 or 4’ length |
FT3A-1/4 | 6.4 | 0.2500 | 2.2 | 0.087 | 1.25±0.15 | 0.047±0.006 | 0.45±0.12 | 0.0177±0.005 | 200 or 4’ length |
FT3A-3/8 | 9.5 | 0.3750 | 3.2 | 0.126 | 1.30±0.15 | 0.057±0.006 | 0.50±0.12 | 0.0197±0.005 | 100 or 4′ length |
FT3A-1/2 | 12.7 | 0.5000 | 4.2 | 0.165 | 1.70±0.15 | 0.067±0.006 | 0.50±0.12 | 0.0197±0.005 | 100 or 4′ length |
FT3A-5/8 | 15.0 | 0.5906 | 5.2 | 0.205 | 1.80±0.15 | 0.071±0.006 | 0.55±0.15 | 0.0217±0.006 | 4’ length |
FT3A-3/4 | 19.1 | 0.7500 | 6.3 | 0.248 | 1.95±0.15 | 0.077±0.006 | 0.55±0.15 | 0.0215±0.006 | 4′ length |
FT3A-1 | 25.4 | 1.0000 | 8.5 | 0.335 | 2.05±0.15 | 0.0807±.006 | 0.55±0.15 | 0.0215±0.006 | 4′ length |
FT3A-1+1/4 | 30.0 | 1.1811 | 10.2 | 0.402 | 2.20±0.20 | 0.0866±0.008 | 0.6±0.15 | 0.0236±0.006 | 4′ length |
FT3A-1+1/2 | 39.0 | 1.5354 | 13.5 | 0.531 | 2.50±0.20 | 0.0984±0.008 | 0.6±0.15 | 0.0236±0.006 | 4′ length |
FT3A-2 | 50.0 | 1.9685 | 17.0 | 0.669 | 2.80±0.25 | 0.1102±0.01 | 0.7±0.15 | 0.0276±0.006 | 4′ length |
Properties | Items | Specification Requirement |
Physical | Shrink Temperature | 120℃ |
Continuous operating Temperature | -45℃ to 125℃ |
|
Tensile strength (MPa) | ≧10.4 Mpa |
|
Ultimate Elongation (%) | ≧300% |
|
Radial Shrinking Ratio | 3:1 |
|
Longitudinal Shrinking Ratio | ≦ 8 % |
|
Electrical | Dielectric Strength (kv/mm) | ≧15 kv/mm |
Volume Receptivity | 1 X 1014 Ω.cm |
|
Chemical | Flammability | Meet UL 224 |
Fluid Resistance | Good to Excellent |
|
Copper Corrosion | No Corrosion |
|
Water absorption (%) | ≦0.2 % |
Property | Test Method | Standard |
Water Absorption | ASTM D570 | ≦0.2 % |
Softening Point | ASTM E8 | 95℃ |
Strength Of Pairing (PE) | ASTM D 1000 | 120N/25mm |
Strength of Pairing (AL) | ASTM D 1000 | 80N/25mm |