
Heat Shrink Molded Product and Sleeves FT-SSST Solder sleeve shield terminators
One piece design, it is used for shield to ground termination. High-performance PE transparent sleeve provides insulation, inspection, strain relief and water proof. Preinstalled ground lead and pre-fluxed solder perform provides a perfectly soldered, strain-relieved and environmentally protected terminal.
Request a Quote for FT-SSST Solder sleeve shield terminators
- Shrink ratio: 2:1
- Working temperature: -55℃~+125℃
- Min. shrink temperature: 80℃
- Min. fully recovery temperature : 160℃
- Excellent flame retardant
- Abrasion and chemical corrosion resistance
- Transparent sleeve provides precise inspection
Technical Data
Property | Stantard |
Voltage drop | ≥ 2.5mV |
Tensiles trength | exceeds strength of ground lead |
Dielectric voltage withstand | ≥ 2.0kV |
Isolation resistivity | 100,000m·Ω |
Product Dimensions | Cable Dimensions | |||||||
A±0.07 | Ø B min. | Ø C min. | H min. | Ø E max. | Ø F min. | Ø G min. | Ø D max. | J±0.5 |
16.5 (0.650) | 1.90 (0.075) | 2.65 (0.105) | 8.25 (0.325) | 2.65 (0.105) | 0.90 (0.035) | 0.50 (0.020) | 1.90 (0.075) | 7.5 (0.295) |
16.5 (0.650) | 2.65 (0.105) | 3.68 (0.145) | 8.25 (0.325) | 3.68 (0.145) | 1.4 (0.055) | 0.75 (0.030) | 2.65 (0.105) | 7.5 (0.295) |
16.5 (0.650) | 4.3 (0.170) | 5.08 (0.200) | 8.25 (0.325) | 5.08 (0.200) | 2.15 (0.085) | 1.25 (0.050) | 4.3 (0.170) | 7.5 (0.295) |
19.1 (0.750) | 5.95 (0.235) | 6.45 (0.255) | 8.25 (0.325) | 6.45 (0.255) | 3.3 (0.130) | 1.8 (0.070) | 5.95 (0.235) | 7.5 (0.295) |
19.1 (0.750) | 7.00 (0.275) | 7.6 (0.300) | 8.25 (0.325) | 7.6 (0.300) | 4.3 (0.170) | 2.5 (0.100) | 7.00 (0.275) | 7.5 (0.295) |