Heat Shrink Tubing for Automotive FT-AGT Non Creasing air groove heat shrink tubing

FT-AGT non creasing air groove heat shrinkable tube is made of modified high abrasion resistance polyolefin material, there is special air groove in the inner wall, the special design provide very smooth shrinkage without creasing, as well as air-tight seal when the rubber hose was bent

Request a Quote for FT-AGT Non Creasing air groove heat shrink tubing
Technical Data

MaterialPolyolefin
-55℃~+125℃Working temperature
Shrink ratio2:1
ColorBlack
ApprovalRoHS, Halogen Free
ToolHeat gun, oven
Part No.As supplied I.D. (D)After ShrunkPacking (m/spool)
I.D. Max.(I)W.T. (T)
20/92090.9100
25/1225120.950
30/153015150
35/1735171.150
40/2040201.250
50/2550251.225
60/2860281.225
39/13*39131.550


PhysicalTensile strengthASTM D2671≥14Mpa
Breakdown elongationASTM D2671≥450%
AgingTensile strengthASTM D2671≥12MPa
Breakdown elongationASTM D2671≥350
DensityASTM D7921.1
Water absorptionASTM D570≤0.5%
Heat shock(200/4hrs)ASTM D2671No drop,no cracking
Low temperature flexibilityASTM D267150℃/4hrs,no cracking
Hardness (Shore D)ASTM D267130-40 HD
ElectricalVolume resistivityASTM D26711015Ω.cm
Dielectric strengthASTM D267120KV/mm

Stay Connected:

Enter your email to get updates on our new products and any other important news and information.